PLC, SCADA, BMS integration, and process controls. We deliver the control scope that turns raw electrical power into a facility that operators can actually run.
A modern commercial or industrial facility is more software than wire. Refrigeration plants run on Allen-Bradley Logix logic talking to compressor controllers over Modbus or EtherNet/IP. Hospitals run essential systems off Eaton or Schneider transfer switches integrated with BMS. Data centers monitor every PDU, ATS, and generator over BACnet or SNMP. The electrical contractor that handles power without handling the control interfaces leaves the operator to integrate a half-finished system.
We deliver controls and automation scope alongside power: PLC and SCADA work, BMS interfaces to mechanical and electrical equipment, motor controls and VFD programming, and the integration testing that proves the building actually works.
Allen-Bradley CompactLogix and ControlLogix, Siemens S7, and Modicon platforms. Ladder logic and structured text development, HMI programming on FactoryTalk View, WinCC, and Ignition. Tag mapping and integration with upstream SCADA.
Plant-wide SCADA on Ignition, Wonderware, and FactoryTalk platforms. Electrical Power Monitoring Systems (EPMS) for mission-critical facilities — Schneider PowerLogic, Eaton Power Xpert, and ASCO Power Monitor. Custom dashboards and alarm management.
Building Management System interfaces to electrical equipment: ATS status, generator state, breaker position, panel monitoring. BACnet, Modbus TCP, and SNMP integration to Honeywell, Siemens, Schneider EcoStruxure, Johnson Metasys, and Distech BMS platforms.
MCC lineups, VFD installation and programming, soft-start configurations, and motor protection setup. Common platforms include Allen-Bradley PowerFlex, ABB ACS880, Yaskawa, and Eaton. Network drives for PLC-controlled processes.
Refrigeration plant control interfaces (Logix, Danfoss AK-SM, CPC, Emerson E2). Process equipment integration for manufacturing, food & beverage, and petrochemical applications. Sensor wiring, instrumentation interfaces, and field bus integration.
Point-to-point I/O testing, loop checks, and end-to-end functional testing of integrated systems. Coordination with the BMS contractor, mechanical controls contractor, and commissioning agent. As-built I/O lists and control narratives.
Send us the controls narrative and we’ll come back with a scope breakdown and integration plan.